GRK R4 HandyPak Multipurpose Screws, 9 by 2-1/2-Inch, 100-Count

GRK R4 HandyPak Multipurpose Screws, 9 by 2-1/2-Inch, 100-Count

Regular Price: $10.19 | Price with discount: $9.17 | You Save: $1.02 (10%)

Got a Question for me? Powered by Aol.com   Product Details #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25 For use in wood, particle-board, cement fiberboard, plastic, and sheet metal Self-tapping, countersinking head; W-Cut thread design Climatek coated for all weather corrosion protection conforms with ICC#2442 One package contains 100 screws Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Great framing screws
These are great screws for framing. Far superior to deck screws from the hardware store and comparably priced here on Amazon. The self tapping threads are excellent, easily screwing into wood that would otherwise require a pilot hole.
Top to learn more

June 12, 2011 (Atlanta, GA USA) | Helpful Votes: 3 | Rating: 5

Saves time, muscles, and frustration. Excellent for framing.
Being little, old, and a lady, renovating a 100+ year old house has been a chore. Framing a wide doorway for two pocket doors required a 12' long 2x10 triple header. I'd already struggled using deck screws to fasten 10' 2x6s in this wall (it's a house with big proportions) and then I found these screws (actually, the 3 1/2" ones). Using them is like cutting into soft butter with a knife! That is not an exaggeration. They also - very important - pulled those three 2x10s TOGETHER TIGHT, instead of tending to push them apart as the deck screws had. They also help tremendously with pulling into square the new lumber that is warped, curved, twisted and otherwise showing how awful new growth lumber is compared with the straight, strong, 100 year old stuff. Buy these screws. They will save you a ton of aggravation and energy.
Top to learn more

March 8, 2012 (Charleston, SC USA) | Helpful Votes: 1 | Rating: 5

Excellent alternative to heavy air framing nailers
Started using these after our contractor recommended them. The only disadvantage to these is that my big, awkward Stanley-Bostitch framing nailer is now going unused, replaced with these screws and a small Bosch 12v driver. Sometimes I need to tap the end of the screw to get the point to bite in before driving it, but if you use a drill or faster driver, very likely will not be a problem. The Torx drive is brilliant, by far the best choice, allowing driving at uncomfortable angles without any difficulty, camming out, or rounding out the screw.Unlike a framing nailer, it's easy to remove these screws in case you should happen to screw up. That came in handy during our recent project!Highly recommend these screws.
Top to learn more

December 9, 2011 (Philadelphia, PA USA) | Helpful Votes: 1 | Rating: 5

Product Description

In addition to a Torx-head design that eliminates cam-out slippage, these innovative self-countersinking bits feature six cutting pockets beneath the head and sharp, saw-like lower threads to drive through a variety of materials smoothly, without tearing. Available in several lengths and sizes. Torx/Star-head driver bits also available (Rockler #s 28420, 21392, 25243 and 26008, sold separately).The R4 is a multi-purpose screw that can be used in all woodworking and plastic applications.Great for:* Wood Cement Fiber Board* Particle Board Composite Decking* Plastic Wood Decking* Sheet Metal MelamineAdditional features:* Sub-head cutters create clean countersunk holes without damaging the surface even in brittle materials.* Eliminates pre-drilling in most cases* Fits perfectly into existing countersunk holes on hinges and other hardware fittings.* Screws 2" long or longer have special CEE thread that enlarges screw hole and improves performance. Top to learn more

GRK FTHS8212HP Trim Handy FIN 8 by 2-1/2-Inch Head Screws, 100 Screws per Package

Regular Price: $9.93 | Price with discount: $8.94 | You Save: $0.99 (10%)

Got a Question for me? Powered by Aol.com   Product Details Zip-Tip Use GRK Bit T-10 Self-Tapping W-cut thread design Patented Climatek coating Finish Trim Head Screw Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Product Description

The patented FIN/Trimâ"¢ Screw is self-tapping with the Zip-Tipâ"¢, W-Cutâ"¢, Climatekâ"¢ coated and the smallest screw head available. The FIN/Trimâ"¢ is recommended for fine carpentry and all trim applications. Some FIN/Trimâ"¢ screws are also available in White FIN/Trimâ"¢ and PHEINOXâ"¢ Stainless Steel. Top to learn more

GRK R4 HandyPak Multipurpose Screws, 9 by 2-Inch, 100-Count

Price with discount: $10.26 |

Got a Question for me? Powered by Aol.com   Product Details One package contains 100 screws Self-tapping, countersinking head; W-Cut thread design #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25 Climatek coated for all weather corrosion protection conforms with ICC#2442 For use in wood, particle-board, cement fiberboard, plastic, and sheet metal This item is eligible for FREE SHIPPING Sale Price: $10.26 Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Great framing screws
These are great screws for framing. Far superior to deck screws from the hardware store and comparably priced here on Amazon. The self tapping threads are excellent, easily screwing into wood that would otherwise require a pilot hole.
Top to learn more

June 12, 2011 (Atlanta, GA USA) | Helpful Votes: 3 | Rating: 5

Saves time, muscles, and frustration. Excellent for framing.
Being little, old, and a lady, renovating a 100+ year old house has been a chore. Framing a wide doorway for two pocket doors required a 12' long 2x10 triple header. I'd already struggled using deck screws to fasten 10' 2x6s in this wall (it's a house with big proportions) and then I found these screws (actually, the 3 1/2" ones). Using them is like cutting into soft butter with a knife! That is not an exaggeration. They also - very important - pulled those three 2x10s TOGETHER TIGHT, instead of tending to push them apart as the deck screws had. They also help tremendously with pulling into square the new lumber that is warped, curved, twisted and otherwise showing how awful new growth lumber is compared with the straight, strong, 100 year old stuff. Buy these screws. They will save you a ton of aggravation and energy.
Top to learn more

March 8, 2012 (Charleston, SC USA) | Helpful Votes: 1 | Rating: 5

Excellent alternative to heavy air framing nailers
Started using these after our contractor recommended them. The only disadvantage to these is that my big, awkward Stanley-Bostitch framing nailer is now going unused, replaced with these screws and a small Bosch 12v driver. Sometimes I need to tap the end of the screw to get the point to bite in before driving it, but if you use a drill or faster driver, very likely will not be a problem. The Torx drive is brilliant, by far the best choice, allowing driving at uncomfortable angles without any difficulty, camming out, or rounding out the screw.Unlike a framing nailer, it's easy to remove these screws in case you should happen to screw up. That came in handy during our recent project!Highly recommend these screws.
Top to learn more

December 9, 2011 (Philadelphia, PA USA) | Helpful Votes: 1 | Rating: 5

Product Description

In addition to a Torx-head design that eliminates cam-out slippage, these innovative self-countersinking bits feature six cutting pockets beneath the head and sharp, saw-like lower threads to drive through a variety of materials smoothly, without tearing. Available in several lengths and sizes. Torx/Star-head driver bits also available (Rockler #s 28420, 21392, 25243 and 26008, sold separately).The R4 is a multi-purpose screw that can be used in all woodworking and plastic applications.Great for:* Wood Cement Fiber Board* Particle Board Composite Decking* Plastic Wood Decking* Sheet Metal MelamineAdditional features:* Sub-head cutters create clean countersunk holes without damaging the surface even in brittle materials.* Eliminates pre-drilling in most cases* Fits perfectly into existing countersunk holes on hinges and other hardware fittings.* Screws 2" long or longer have special CEE thread that enlarges screw hole and improves performance. Top to learn more

GRK RSS10318HP RSS HandyPak 10 by 3-1/8-Inch Structural Screws, 50 Screws per Package

Regular Price: $12.66 | Price with discount: $10.00 | You Save: $2.66 (21%)

Got a Question for me? Powered by Aol.com   Product Details Self-Tapping W-cut thread design Use GRK Bit T-25 Patented Climatek coating Zip-Tip Lag Screw Alternative Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Product Description

The patented RSSâ"¢ Rugged Structural Screw is self-tapping with the Zip-Tipâ"¢ and W-Cutâ"¢, starhead, has a washer head design, and CEE thead. The RSSâ"¢ is made of specially hardened steel to provide you with high tensile, torque and shear strength. The built in washer head has no sharp edges as conventional lag screws. The RSSâ"¢ is also available in PHEINOXâ"¢ Stainless Steel. Top to learn more

GRK R4 HandyPak Multipurpose Screws, 9 by 3-1/8-Inch, 100-Count

Regular Price: $14.45 | Price with discount: $11.50 | You Save: $2.95 (20%)

Got a Question for me? Powered by Aol.com   Product Details Climatek coated for all weather corrosion protection conforms with ICC#2442 For use in wood, particle-board, cement fiberboard, plastic, and sheet metal Self-tapping, countersinking head; W-Cut thread design One package contains 100 screws #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25 Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Great framing screws
These are great screws for framing. Far superior to deck screws from the hardware store and comparably priced here on Amazon. The self tapping threads are excellent, easily screwing into wood that would otherwise require a pilot hole.
Top to learn more

June 12, 2011 (Atlanta, GA USA) | Helpful Votes: 3 | Rating: 5

Saves time, muscles, and frustration. Excellent for framing.
Being little, old, and a lady, renovating a 100+ year old house has been a chore. Framing a wide doorway for two pocket doors required a 12' long 2x10 triple header. I'd already struggled using deck screws to fasten 10' 2x6s in this wall (it's a house with big proportions) and then I found these screws (actually, the 3 1/2" ones). Using them is like cutting into soft butter with a knife! That is not an exaggeration. They also - very important - pulled those three 2x10s TOGETHER TIGHT, instead of tending to push them apart as the deck screws had. They also help tremendously with pulling into square the new lumber that is warped, curved, twisted and otherwise showing how awful new growth lumber is compared with the straight, strong, 100 year old stuff. Buy these screws. They will save you a ton of aggravation and energy.
Top to learn more

March 8, 2012 (Charleston, SC USA) | Helpful Votes: 1 | Rating: 5

Excellent alternative to heavy air framing nailers
Started using these after our contractor recommended them. The only disadvantage to these is that my big, awkward Stanley-Bostitch framing nailer is now going unused, replaced with these screws and a small Bosch 12v driver. Sometimes I need to tap the end of the screw to get the point to bite in before driving it, but if you use a drill or faster driver, very likely will not be a problem. The Torx drive is brilliant, by far the best choice, allowing driving at uncomfortable angles without any difficulty, camming out, or rounding out the screw.Unlike a framing nailer, it's easy to remove these screws in case you should happen to screw up. That came in handy during our recent project!Highly recommend these screws.
Top to learn more

December 9, 2011 (Philadelphia, PA USA) | Helpful Votes: 1 | Rating: 5

Product Description

In addition to a Torx-head design that eliminates cam-out slippage, these innovative self-countersinking bits feature six cutting pockets beneath the head and sharp, saw-like lower threads to drive through a variety of materials smoothly, without tearing. Available in several lengths and sizes. Torx/Star-head driver bits also available (Rockler #s 28420, 21392, 25243 and 26008, sold separately).The R4 is a multi-purpose screw that can be used in all woodworking and plastic applications.Great for:* Wood Cement Fiber Board* Particle Board Composite Decking* Plastic Wood Decking* Sheet Metal MelamineAdditional features:* Sub-head cutters create clean countersunk holes without damaging the surface even in brittle materials.* Eliminates pre-drilling in most cases* Fits perfectly into existing countersunk holes on hinges and other hardware fittings.* Screws 2" long or longer have special CEE thread that enlarges screw hole and improves performance. Top to learn more

GRK RT ProPak TRIM Head Composite Deck Screws, 8 by 2-3/4-Inch, 544-Count

Regular Price: $49.99 | Price with discount: $42.09 | You Save: $7.90 (16%)

Got a Question for me? Powered by Aol.com   Product Details Self-tapping, TRIM head screws; W-Cut thread design One pail contains 544 screws #8 trim screws use bit T-10; #9 trim screws use bit T-15 RT series screws for composite decking Climatek coated for all weather corrosion protection conforms with ICC#2442 Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Great outdoor screws with very small head
I bought a case (605) of these to install foam panels imitating stone on top of my wood siding. For these application they were totally overkilling, but for installing wood on wood (like for decking), they should be great.The best features:- counter-threaded at the top: this helps push the decking onto the base when you draw in the last portion of the screw.- very small head: the smallest I was able to find for outdoor use. It will leave very little holes.- it doesn't split the wood (in case of cheap pine molding, it did, but not on the siding).Cons:- maybe just the price, but it is totally worth it.They are so grate that I ordered a second case to finish the project, and to have some leftovers for different projects at home.
Top to learn more

November 28, 2011 (New York, NY United States) | Helpful Votes: 0 | Rating: 5